|
|
|
| Prepare the acrylic surface. Remove existing surface acrylic to a depth of 1-3 mm. |
Mix a small amount of acrylic over entire bonding surface. Allow just a few minutes for it to cure. |
|
|
|
| Using the supplied UltraBrush, apply one or two layers of VersaSoft Primer, allow the primer to completely dry. |
Apply VersaSoft to the denture surface to a minimum thickness of 2-3 mm.* |
|
|
|
Trim the gross excess using a sharp scalpel or
scissors. Smooth rough areas and shape
borders using the supplied silicone trimmer. |
Apply VersaSoft Varnish to the acrylic-silicone joint and on functional borders. |
